| MS adhesive for building assembly and structural sealing | ETAG 002 ASTM C920 | Tensile strength: 1.5 – 3.0 MPa | Weather resistance: Excellent resistance to UV rays, heat, and ozone, with a long service life. | Environmental friendliness: Zero isocyanate, solvent-free, low VOC | Surface drying time: 5-15 minutes, standard products 20-40 minutes |
| GB/T 23261 JC/T 885 | Elongation at break: ≥ 400% – 600% | Temperature range: -40°C to 100°C, -10°C | Non-toxic and odorless: Worker-friendly and environmentally friendly. | Curing speed: It can still cure effectively at low temperatures. |
| Displacement capacity: ±25% to ±50% | Fatigue resistance: Excellent, able to withstand repeated expansion and contraction of the joint. | | Extrudability: Good; suitable for standard glue guns. |
| Elastic recovery rate: ≥ 85% | | | Tool preparation time: Approximately 10 minutes |
| Modulus: High or low modulus options available | | | |
| General and Specialty Household MS Adhesives | GB 18583, JC/T 885 | Elongation at break: ≥ 500% | Anti-mold property: Level 0 anti-mold, provides long-lasting inhibition of mold growth. | Environmental certifications: Certified by French A+ and German GEV indoor air quality testing standards. | Paintability: The surface can be covered with water-based/oil-based paints without peeling. |
| ASTM G21, ISO 846 | Modulus: Low modulus, low stress on the substrate. | Chemical resistance: Resistant to household cleaners and soapy water | Food safety exposure: Some products have passed relevant tests and are suitable for use on kitchen countertops, etc. | Drying time: 20-40 minutes |
| Adhesion: Adheres well to a variety of building materials such as ceramic tiles, painted walls, metal, and wood. | Water resistance: Excellent; does not turn white or peel off after prolonged immersion in water. | | Colors: White, transparent, etc.; good color stability. |
| MS adhesive for industrial and transportation applications | ISO 11600 | Tensile shear strength: 2.5 – 4.0 MPa | Resistant to alternating high and low temperatures: -40°C to 90°C, with stable performance. | Non-corrosive: Safe for sensitive metals such as coated steel sheets and aluminum alloys. | Applicable period: Moderate, suitable for large-scale construction. |
| Peel strength: ≥ 8 N/mm | Salt spray corrosion resistance: Excellent, no corrosion to metal substrates. | Environmental friendliness: Meets the environmental requirements for interior materials used in vehicles. | Adhesion: Strong adhesion to commonly used industrial materials (such as metals, glass, composite materials, and coated steel sheets). |
| Toughness: Extremely high, with excellent resistance to vibration and impact. | Fatigue resistance: Excellent, suitable for joints subjected to dynamic loads. | | Construction environment adaptability: Width |
