| Medium and low strength general-purpose threadlocker | ISO 10964 | Breaking torque (M10 nut):Medium strength: 5 – 10 N·m; Medium-high strength: 10 – 15 N·m | Temperature resistance: -55°C to 150°C | Curing mechanism:Anaerobic type, cures in an oxygen-deficient environment at the thread meshing surface. | Location time:Fast-setting type:2-5 minutesStandard: 5-20 minutes |
| Average disassembly torque: Typically lower than the breaking torque, facilitating disassembly. | Media resistance: Good resistance to oil and water. | Applicable metals: Excellent curing effect on active metals (such as steel and copper). | Fully cured: Reaches maximum strength in 24 hours. |
| Viscosity: Low to medium viscosity (100 – 1500 mPa·s), easily penetrates. | Aging resistance: Long-term stability | | Applicable gap: < 0.15 mm |
| High-strength and high-performance threadlockers | ISO 10964 | Breaking torque (M10 nut):High strength: 15 – 25 N·m; Ultra-high strength:≥ 25 N·m | High temperature resistance:Long-term temperature resistance-55°C to 230°C (High temperature resistant type) | Oil tolerance:It can be applied directly to lightly oily surfaces and cures effectively (oil-resistant type). | Location time:Standard: 10-30 minutes |
| Shear strength: High strength: ≥ 15 MPa; Ultra-high strength: ≥ 20 MPa | Chemical resistance: Excellent resistance to solvents, acids, and alkalis (chemical-resistant type) | Curing characteristics: Forms a hard thermosetting plastic; disassembly requires heating to approximately 250°C. | Complete curing: 24 hours |
| | Shock and vibration resistance: Excellent | | Application Recommendation: For best results, it is recommended to use in conjunction with a specialized cleaning agent and accelerator. |
| Quick-setting threadlocker | | Breaking torque (M10 nut): Covers the medium to high strength range (5 – 20 N·m) | Temperature resistance:-55°C to 150°C | Curing speed: The formula has been optimized for high reactivity. | Location tracking time: 1-3 minutes (Core advantage) |
| Viscosity: Low to medium viscosity, ensuring rapid penetration and wetting. | Media resistance: Good | | Reach usable intensity: 5-10 minutes |
| | | | Complete curing: 24 hours |
| | | | Application scenarios: Automated assembly, assembly line maintenance, emergency repairs |
