Acrylic Structure AB Adhesive
High-strength, fast-curing acrylic AB adhesives from our factory. Designed for demanding structural and assembly applications, offering rapid fixture, excellent toughness, and long-term durability.
Our adhesives demonstrate industry-standard performance:
Acrylic Structure AB Adhesive Product Models
- CM-AC-AB-8001 – General Purpose Acrylic AB Adhesive
- CM-AC-AB-8002 – Transparent Acrylic AB Adhesive
- CM-AC-ST-8003 – Two-Part Acrylic Structural Adhesive
Technical Specifications
Comprehensive technical data for selection and engineering reference.
Performance Properties
| Property | Test Method / Notes | Value |
|---|---|---|
| Tensile Strength | ASTM D638 | 10–25 MPa |
| Lap Shear Strength | ASTM D1002 | 8–20 MPa |
| Elongation at Break | ASTM D638 | 20–80% |
| Service Temperature | Continuous | −40°C ~ 120°C |
| Viscosity (mixed) | Brookfield | 5,000–40,000 mPa·s |
| Fixture Time | Room Temperature | 5–15 minutes |
| Full Cure | 23°C / 50% RH | 24 hours |
Material Compatibility Chart
Excellent
Excellent
Good
Excellent
Good
Professional Acrylic AB Adhesive Solutions
Our acrylic AB portfolio is engineered to support robust structural bonding, invisible joints, and rapid production assembly.
Core Product Lines
General Purpose AB Adhesives
Versatile bonding for mixed substrates
Transparent Appearance Grades
Clear cure for visible joints
Structural Two-Part Adhesives
High-strength for load-bearing assemblies
−40°C to 120°C
Temperature Range
3–10 Years
Service Durability (application-dependent)
Usage Guide
These acrylic AB adhesives deliver best results when substrates are properly prepared and mixing/application follow recommended procedures.
Surface Preparation
Ensure substrates are clean, dry, and free of oils, dust, or coatings. Light abrasion or solvent wipe can improve adhesion on low-energy plastics.
Application & Mixing
Dispense and mix Part A and Part B at the specified ratio. Apply the mixed adhesive evenly to one surface, assemble within the open time, and clamp/fixture as required.
Curing
Typical fixture time is 5–15 minutes; full mechanical properties develop within 24 hours at room temperature. Elevated temperatures accelerate cure.
Key precautions for this type of product
- Maintain correct mix ratio and thorough mixing.
- Avoid over-thick adhesive layers to prevent internal stress.
- Do not disturb assemblies during initial fixture time.
- Use in well-ventilated areas and follow SDS instructions.
Why Choose Our Acrylic Structure AB Adhesive
Designed for fast, reliable structural bonding with options for clarity and high strength.
Reliable Structural Strength
Delivers consistent load-bearing performance.
Fast Curing for Productivity
Short fixture times improve throughput.
Appearance-Grade Options
Transparent grades for invisible joints and aesthetics.
Broad Material Compatibility
Bonds metals, plastics, composites, and more.
Durable Under Stress
Engineered for long-term mechanical and environmental stability.
Production-Friendly
Suitable for manual and automated dispensing.
Versatile Solutions Across Industries
Acrylic AB adhesives provide fast, high-strength bonding solutions for industrial assembly and field repairs.
Their combination of rapid fixture, mechanical robustness, and appearance options makes them valuable across multiple sectors.
Using acrylic AB systems helps manufacturers reduce assembly time, improve joint durability, and simplify repairs.
Material Safety and Environmental Protection Commitment
We uphold strict material safety standards and prioritize environmentally responsible practices throughout our operations.
Certified Safe Formulations
Formulations comply with common industrial safety guidelines and low-odor options are available.
Eco-Conscious Material Selection
Raw materials are chosen to minimize environmental impact where feasible.
Controlled Emissions & Waste
Production and packaging follow procedures to minimize emissions and manage waste responsibly.
Safe Handling Guidance
SDS and handling instructions are provided; use appropriate PPE and ventilation during application.
Frequently Asked Questions
Ready to Get Started?
Ready to discuss your sealant requirements? Our technical team is here to provide expert consultation and competitive quotations.